Asiakas ja Projekti

Alkusivu

Marathon on jaettu Frontofficeen ja Backofficeeen. Ohjelmat, joihin sinulla on valtuudet, ovat klikattavissa. Klikkaamalla Kalin Setterberg – logoa ylhäällä vasemmassa kulmassa, pääset aina alkusivulle.

Vie sinut alkusivulle.

Klikkamalla tätä symbolia (tai Alt + nuoli alas) näet ne toiminnat, joissa olet ollut etkä vielä ole sulkenut. Jos symboli on keltainen, jokin ohjelmista on sellaisessa tilassa, että sinun on mentävä sulkemaan se ennen kuin voit kirjautua ulos Marathonista. Kun kirjaudut pois Marathonista, lista tyhjenee

Käytetään ohjelmasta poistumiseen

Kertoo, missä kohtaa Marathonia sillä hetkellä sijaitset

Hammaspyörän alla löydät seuraavat valinnat:

Asennukset	Yleiset järjestelmäasennukset. Asennukset koskevat vain sinun käyttäjänimeäsi.
Uusi salasana	Salasanan vaihtaminen.
Vaihda yritys	Vaihto toiseen yritykseen samalla Marathon-asennuksella.
Käyttötuki	Käyttötukilomake Marathonia koskevia kysymyksiä varten. Lähetetään Kalin Setterbergin käyttötukiosastolle.
Dokumentointi	Linkitys Kalin Setterbergin dokumentointisivulle, jossa voit lukea uutuuksista Marathonissa (ruotsiksi ja englanniksi) sekä manuaaleja.
Tulostus	Tulostus sen hetkisestä kuvanäytöstä fyysiseen tulostimeen.
PDF	Tulostus sen hetkisestä näyttökuvasta PDF-muotoon.
Uusi ikkuna	Avaa uuden Marathon-ikkunan.
Lisää suosikkeihin	Kun olet sivulla, jonka haluat merkitä suosikiksi, klikkaa silloin ”lisää suosikkeihin” niin ohjelma/toiminto lisätään automaattisesti Suosikit- otsikon alle aloitussivulla.
Kirjaudu ulos	Kirjaudu ulos Marathonista

Oikeassa alareunassa näet punaisella, jos sinulla on raportoimattomia päiviä Marathon Tidissä. Näet myös mikäli sinulla on laskuja hyväksyttävänä tai Marathonista lähettämiä fakseja/sähköpostiviestejä lähetysjonossa. Klikkaamalla kenttiä ohjelma vie sinut suoraan k.o. ohjelmaan eli joko Marathon Tidiin, Hyväksyntään tai Lähetysjonoon

Toiminnot

Oikea hiiripainike	Käytetään taulukoissa esim. suoratulostuksissa (Ctrl ja hiiren napautus Maceissa)
Tab/Enter	Siirry seuraavaan kohtaan/kenttään
Shift+Tab/Enter	Siirry edelliseen kohtaan/kenttään
Alt+Kirjain	Esim. AVAA, valitse Alt + A
Ctrl+Page Down	Siirry seuraavalle välilehdelle
Ctrl+Page Up	Siirry edelliselle välilehdelle
Kolmen pisteen hakuruutu	Näyttää listan kenttään syötettävästä tiedosta, esim.aikaraportointikoodit.
F1	Avaa kolmen pisteen hakuruudun
F3	Hakee viimeksi tallennetun tiedon kenttään
Pikahaku	Voit kirjoittaa kirjainyhdistelmän ensimmäiset kirjaimet ja siten rajoittaa valikoimaa. Haku toimii usealla hakutermillä.
Pikahaku	Pikahaku, joka näyttää rekisteritiedot tiputusvalikkona asennetaan hammaspyärän alla valinnassa Asetukset/Yleistä.

Taulukot Marathonissa

Marathonin taulukkojen sarakkeita voi muuttaa; niiden järjestystä, leveyttä sekä lajittelua. Asetukset tallentuvat seuraaviin kirjautumisiin.

Klikkaa harmaata hakuruutua taulukon oikeassa yläkulmassa tai klikkaa hiiren oikeaa painiketta taulukossa. Pieni valikko avautuu, valitse siitä Sarakkeet. Marathon näyttää silloin mitä sarakevaihtoehtoja taulukolle on. Rastita ne jotka haluat mukaan.

Jos haluat vaihtaa sarakkeiden paikkaa, voit vain vetää saraketta otsikosta ja päästää sen kohtaan, johon sen haluat. Sarakkeen reunoja vetämällä voit säätää leveyden.

Kun klikkaat sarakkeen otsikkoa, näet joko ylös- tai alaspäin osoittavan nuolen. Ylöspäin osoittava nuoli tarkoittaa, että suurimmat luvut näytetään ensin, alaspäin osittava näyttää pienimmät ensin. Klikkaa toisen kerran jos haluat muuttaa lajittelujärjestystä. Kaikki taulukoita koskevat asetukset tallentuvat käyttäjälle.

Suosikit

Suosikkisarake löytyy melkein jokaisesta Marathonin taulukosta. Voit nähdä taulukossa vain ne koodit, projektit, yms., joita useimmiten käytät. Tee näin: Sarakkeiden valintaruudussa (jonka saat esiin oikeaklikkauksella taulukossa tai klikkamalla harmaata ruutua otsikkorivin oikeassa laidassa) löytyy valinta Suosikit. Valitse se ja klikkaa tyhjiä palloja saadaksesi esiin tarvitsemasi värit. Paina OK.

Suosikkisarake tulee aina vasempaan laitaan eikä siinä ole otsikkoa. Merkitsemäsi rivi merkitään pallolla. Klikkaa sarakkeen otsikkopalkkia vaihtaaksesi vain suosikkien ja koko listan välillä. Kaikki parametrit toimivat rinnakkaisesti, eli voit esim. käyttää pikahakua myös suosikkilistassasi.

Asiakas ja Projekti

Perusnäkymä (Asiakkaat ja Projektit) näyttää vasemmalla puolella kaikki järjestelmään syötetyt asiakkaat. Valitsemalla asiakkaan näet sen projektit ruudun oikealla puolella.

Jos rastitat ”Kaikki projektit”, näkymä on tämänlainen:

Erääntyneet projektit	Jos projektille on asetettu deadline, ja päivämäärä ylittyy tai jos sillle on asetettu laskupäivämäärä ja se ylittyy, ne näkyvät erääntyneiden projektien listassa. Tämä näkyy vain projektijohtajilla ja tuotantosuunnittelijoilla.
Vain aktiivit	Sekä asiakas- että projektipuolella voit valita näkymään Vain aktiivit projektit/asiakkaat
Vain omat	Omilla tarkoitetaan projektia/asiakasta joissa sisäänkirjautunut henkilö on joko asiakasvastaava tai projektijohtaja/tuotantosuunnittelija.
Excel	Tulosta haluamasi tiedot Exceliin. Rastita valintaruudusta sarakkeet. jotka haluat mukaan. Jos olet valinnut listassa vain omat/aktiivit ja haluat vain ne tulostukseen, valitse ”vain valitut rivit”.
Suljetaan	Indikoi talousosatolle, että projekti on valmis suljettavaksi

In the client lis In the list, click the right mouse button and select the columns you wish to see. The selection willbe saved for your user name.

The client list has the following columns:
Favourites	Possibility to select only the most frequent clients.
Code	A unique identity for the client.
Client	Client name.
CM	The employee code of the person in charge of the client (Client manager) in your own company.
A lock	A lock means that the client is closed (inactive). This means that the client does not save any active projects and that new projects not can be opened to it. .
Group/Group name	Group code/name

The columns in the project list are:

Favourites	Possibility to select the most frequent projects only.
Code	A unique identity for the project. The code consists of the client code + a running number.
Project	The project name.
Registered	Date when the project was opened (registered).
PM	Employee code of the project manager.
$	Shows that there is WIP on the project.
A lock	A project with a lock is closed.
Due	Overdue client invoices on the project are shown in red. (one symbol if the invoice is due more than 8 days, two symbols if more than 31 days)
Inv text created	If this is marked, somebody has started to create an invoice text on the Invoice- tab.
Inv text ready	If this is marked, somebody has created an invoice text and marked it as ready.
Production manager	Employee code of the production manager
WIP	Shows the amount in the project’s WIP.
Currency	Shows the base currency of the project. (Used only in multiple agency handling)
Project type	Shows project types: external (E), within group or external within group (G), internal (I), project for internal work (9) and speculation- or pitch projects (J).
Estimate	Shows if the project has a cost estimate.
To be closed	Indicates to the accounting department that the project is ready to close.
WIP Fees	Shows amount in WIP Fees
WIP Purchases	Shows amount in WIP Purchases
WIP Other	Shows amount in WIP Other
Fixed price	Shows the fixed price of the project, if that has been set in advance
Deadline	Shows the project’s deadline date, if set (Base registers/Pro/Client & Project)
Inv date	Shows the project’s invoice date, if set (Base registers/Pro/Client & Project)
Invoiced	Shows what has been invoiced on the project (including pre-inv.)
Marathon Time	Marked, if the project is reportable in Marathon Tid.
Local name	Shows a local project name, if set
Reference no	Shows possible reference number.
End date	Shows closing date of the project, if it is closed.
Start date	Shows the project’s start date, if stated.

Ifyou wish to see the columns in a different order, you can drag and drop them where you want with the mouse indicator. Click in the heading field in the column that shall control the sorting.

Enter new clients and projects

New clients and projects can be entered directly in Client & Project. (New entries have to be activated by an administrator in Classic and you must have authorisation on user level.) The fields to be shown are selected in the system parameters- therefore the view in your company can differ from the view in this manual.

New client

Click New in the client list. Fill in the field Client ID and press OK.

Client ID	The client’s unique identity. Maximum four (4) digits
Name	The complete name of the client, shown on invoices etc.
Internal name	The internal name can be used to identify the client with another, internal, name. The name is shown as client name in Marathon, but the client’s real name will be printed on invoices.
Client manager	Marathon suggests you as client manager, but you can of course change name.
Client contact	Contact person at the client.
Collective client	You can use Collective clients to tie together different clients, e.g. different branches of a client. E.g. Volvo can be collective client for Volvo Göteborg and Volvo Stockholm. (Collective clients are set in Base registers/Pro).
Category	You can divide clients in to categories and use for statistics
VAT	Enter what type of VAT the client represents.
Domestic	Ordinary VAT for domestic clients.
EU	VAT free for clients within the EU.
Other countries	VAT free for clients outside of the EU.
VAT number	Non-domestic clients must be completed with a VAT number.You can copy previously entered information from another client. Click the button “Copy from” andselect the client you want to copy from. The function copies all information and writes it in the fields (it writes over possible earlier text), you can then edit the data before you save.

New project

Select client in the client list, thereafter click New in the project part

If you enter project numbers manually, start with filling in a number. If you use automatic project numbering, this field is not shown and the project is assigned a number when you save it.

Client-ID	The selected client. Comes automatically.
Name	Project name.
Project manager	Project manager. Marathon suggests you (thelogged in).
Production manager	Production manager. Marathon suggests you (the logged in)
Project description	An optional description of the project
Type	The different project types are:
External	Projects for external clients, chargeable
Speculation	Speculation/competition projects. This can be changed to external projects later (in Backoffice).
Internal	Internal, not chargeable project
Group	External project within the company group.
Job type	Defines the type of job. You can select up to three different job types per project.
Client contact	The contact person at the client..
Master	Similarly to Collective clients, also projects can be tied together with a Master project definition. That gives opportunity to analyse projects in a broader perspective, as well as they can be analysed separately.
Special invoice text	This text will come as a suggestion on each invoice sent within this project, e.g. reference number. When invoicing, you can choose if you want to include the text or not.
Our ref on invoice	Fill in, if someone else than the project manager shall be referred to on the invoice.
Marathon Time	Tick this box if you want the project to be in the time reporting program.
Group	Enter project group. Look for alternatives in the search box.
Cost centre	If the project revenue shall be redirected to a certain cost centre
Fixed price	If the project has a fixed price, it can be stated here. In the project analysis and in reports, you can later compare what has been registered and the fixed price.
Deadline	Possibility to fill in deadline for the project. Deadline is shown as Overdue projects in the lower part of the Marathon window. Deadline can also be shown in reports.
VAT	State the VAT type for the project, so that the system can handle taxes on the project.
Invoice date	If you fill in the invoice date of the project, it will be shown when due in the Marathon window.
Copy from	You can copy previously entered information from another project. Select the project you want to copy from. The function copies all information and writes over earlier entered information.

Analysis

This tab shows the current status of the project. You can deepen into any underlined heading.

Currency	Marathon supports handling of multiple currencies. It is possible to use other that your base currency; the amounts will then be recalculated with the currency rate stated in Base registers/General/Currencies.
Fees/Purchases/Other	In these menus you can choose how you want the information on fees/purchases/other to be shown when deepening. If you choose e.g.Cat/Code/Employee in Fees - Marathon shows you first the information divided per job category. If you click on a certain category, you will see the information divided in job codes. Click on a job code to see the employees that have been reporting time on the code. Finally, by clicking on an employee code, you can see her/his complete time report row including the comments.
Show only updated hours	If you tick this box Marathon shows only the hours that have been updated by the Accounting Department. If not, all reported hours on the project are shown.
Total master project	If you tick this, Marathon shows statistics for all projects that are tied to different master projects. The master projects are defined in the project registration or in the General information tab at each of the separate projects.
Show period	The analysis tab shows normally the current status of the project, but it is possible to write a certain period here, to see only that period’s data. Note that Invoiced shows what has been invoiced of registered during that period.
Fixed price	Fixed price can be stated here or in the tab General information, provided that the field is active.
Budget	This column shows the total sums of the estimate divided on fees, purchases and other. (If the parameter “Include only confirmed estimates” is checked, only confirmed estimates will be shown here.)
Quantity	Number of reported hours, number of purchases and number of other records
Registered	This column calculates the monetary value of actual fees, purchases and other. Concerning fees the value is based on the number of hours multiplied with the hourly rate/code price entered in Marathon. Concerning purchases the purchase price (cost) added to the mark-up defined for the purchase code.
Adjusted	Adjustments are normally made in connection with invoicing or when closing project. Click on the underlining to see adjustment details.
Invoiced	Shows what have been invoiced so far on the project. Read more about invoiced below.
WIP	Amount to be invoiced. The WIP is the sum of registered amount plus possible adjustments minus the invoiced amount.
Pre-inv.	Shows if there is any pre-invoices on the project (i.e. not invoiced from WIP) that not yet have been deducted from the WIP. When the deduction is done, the amount shows in the column Invoiced.

Click on the column heading to see information of what has been invoiced. The following image will be displayed.

The picture shows the invoices behind the amounts. Click on an invoice to see more information about it. If there is a red sign in the DUE column, the invoice is overdue. Click on the sheet on the right to see the scanned invoice in Pdf format.

General information

This tab shows all project information entered at the time of registration or transferred from the client. If you want to change something, click Edit. The window is the same as when entering a new project. If nothing is registered on the project, you can, if you want, delete it.

Authorization

This tab tells who the project manager and client manager are. If the project has limited access you can see here which ones of the employees have access.

Price

The price tab contains information of how the project is priced divided into fees, purchases and other.

First Marathon tells if there is a fixed price for fees, purchases and/or other.

Then you can see if there are any exceptions from the ordinary rates. The special prices cannot be changed in this tab (They have to be edited in Back office). ****/*** means that the special pricingconcerns all employees and job codes.

The example above shows that all employees, except Carl Eriksson, cost 1 500 on all codes. Carl Eriksson costs normally 1 200, but on code 010 his rate is 1 000.

If you use pricing per job code, you can’t use special hourly rate. In those cases Marathon says that he price is fetched from the code.

Purchases have defined mark-ups per code for different kinds of purchases. Concerning Other in the example above, Marathon tells that there is a fixed price and that the unit prices are fetched from the codes.

Cost estimate

The tab can be used not only to create estimates, but also for writing quotations.

Confirm	You can mark an estimate as Confirmed. The estimate will be marked with a confirmation date and user name of the confirmer. A parameter in the system(Base registers/Pro/Parameters/Project estimate) defines whether an estimate must be confirmed or not in order to be included in calculations.
Delete confirmation	You can also cancel a confirmation- if you must do changes in the estimate. If you confirm the budget again after the cancellation, new date and user name will show on it.
Activate	Possibility to activate a deactivated estimate
Deactivate	If a project has many estimates you can deactivate the revisions you want to exclude from the project analysis, reports, etc.

New estimate

Click New to create a new estimate. The estimate has separate tabs for Fees, Purchases, Other and Text & Currency. There are no specific rules of what it must include, you can choose to budget on optional detail leve

Write headings and texts in Text & currency. If you want some text to be printed out after the estimated values, write it in the field Estimate text After.

Copy from	You can use existing templates or previous estimates in new estimates.
Templates	Select template. Templates are registered in Backoffice/Project Accounting/Estimate templates
Update prices	If you set an estimate on employee level, and the employee's prices change, you can update the price in order to get the new one into the estimate.
Import team	Imports all employee from the project’s team to the estimate.

Print estimate

When the estimate is saved, you can print it out. There are a few printout selections to do

Special invoice text	Text written as special invoice text on the project (e.g. reference number that you want on the client’s invoice).
Estimate text before	Text that has been written in the Estimate text before-field in the texttab.
Page break after heading	Tick the box if you want a leaf with project information separately from the actual budget.
Fee/Purchases/Other	Select detail level in the drop-down menus. If you e.g. select Code/description, the estimate will be divided in codes and you can see comments for each code. If you have just set fixed amounts for fees/purchases/other, Description is the best printing alternative. Note, that even if you have created a very detailed budget, you can still print out one more compressed, e.g. on category level.
Estimate text after	The text that has been written in the Estimate text after in the text tab.
Show hours	Select if you want to see number of hours for the fee.
Subtotals	Select on what level you want to see the subtotals. The higher numbers you choose, the more detailed the subtotals will be.
Show 0-lines	Select if you want to see lines with zero- amounts
Show amounts on…	When you select this, the amount will not be specified by detail for each record; only the total sum will be shown for fees, purchases and other.
Print out VAT	All values in the estimate are exclusive of VAT. If you want to see the amounts with VAT, tick this alternative.
Language	You can select between different languages (Marathon is available in several languages - but in order to see your company’s specific fee and purchase/other codes, check that they are translated in Backoffice) Otherwise they will show in your company’s basic language.
PDF/Spreadsheet	The destination of the printout; either in Pdf format or as an export to Excel.
Printout template	If your company is using different templates for printouts, select one in the menu.

Fee

The fee tab has two “sub-tabs”; reconciliation and resource planning.The reconciliation module is the same that is shown in Marathon Time. You can follow the employees’reported hours either per project or total.

The resource planning tab shows how the time has been planned in Back office (Projectaccounting/resource planning). You can select a period and sort the list per employee, code or date.

Only planned time	Shows only the time that has been planned for the project.
Dates	You can select a period.
Employee	Shows the planned time per employee.
Code	Shows the planned time per job code.
Date	Shows the time per date.
Detailed	Shows a detailed list.

Purchases

Inquiries are found in the PURCHASES tab in Client & Project. Inquiries can be sent to suppliers and later be used as a framework for purchase orders. Purchase orders may be created directly from theinquiry, or from the Purchase order tab.

Create a new inquiry. Click NEW.

Purchase of	Text, which will be shown in the Text-field in the purchase order. It will also be shown in Marathon Approval.
Purchase code	Type of purchase.
Our reference	Employee in the own company that is in charge of the purchase. Marathon suggests the logged-in employee.
Quoted price	Can be filled in when the inquiry has been replied to. It can later be seen as a column in the overview list (and in the inquiries list in Backoffice), which can be used as overview of purchase order recipient’s and also for follow-ups on price developments regarding previous inquiries.
Company	Company, into which the purchase goes.
Supplier	If the supplier has been registered with address and terms of payment, this information will automatically be pasted to the fields below..
Delivery address	Address, where the purchase shall be delivered. Select between own address, client’s address or write an address manually.
Goods label	The delivery’s label (e.g. project-ID)
Description text	Text field for notes to the supplier. A purchase order text may be connected to each purchase code. If selected, it will show automatically.
Copy from	Information on inquiries may be copied from an already existing inquiry.
Print	When an inquiry has been saved it can be printed out to Pdf or be sent to the supplier either as fax or email. When an inquiry has been printed out, it turns inactive.
New purchase order	If an inquiry shall be used as a purchase order, select the inquiry and press new purchase order. The purchase order receives a running number.
Open purchase order	Select open purchase order to make complementary additions to the order.
Print purchase order	The purchase order can be printed out or sent to the supplier by fax or e-mail.

Creating a purchase order for a purchase facilitates the work of the accounting department and approvers, as it is possible to match the purchase order with the invoice later.

If the box Only activeis ticked, the list shows only those purchase orders that has not yet beenmatched with an invoice. Select a line and click openin order to see more details about a specific order.

All of the company’s inquiries and purchase orders are shown in Backoffice/Purchase ledger.

Printout

You can print out project status in this tab. Use the search boxes to see all alternatives. Start withPRINTOUT. If you click SAVE SELECTION, your selection will be saved and suggested to you nexttime you are in the program. Note that only imported hours are shown in the printout.

General information	Main information about the project, e.g. project manager, start date, client manager, etc. Contains also information about parameters set for the project.
Total	Shows total project status, i.e. the same information that you can find in the Analysis tab.
Details fee	Shows hours divided according to your selection.
List fee	Shows what each employee has reported. The list can be reduced to a certain period.
Hide amounts	Possibility to hide amounts in printout.
Details purch	Shows purchases according to your selection.
List purch	Detailed list of all purchases.
Summarize purchases…	Summarizes purchases whose WIP: s are invoiced or adjusted away.
Mark accumulated…	Marks the time reported as accumulated project time.
List orders	A list of all orders on the project. You can choose to exclude the matched orders - select Do not show binding purchase orders in the menu.
Details others	Shows other records according to your selection.
List others	A detailed list of other registered costs.
Summarize others…	Summarizes other-records whose WIP: s are invoiced or adjusted away.
List invoices	A list of all invoices on the project.
Invoice draft	Shows the current amount in WIP to be invoiced. The detail level is according to settings on the project. The numerical codes will not be visible on the real invoice.

Invoicing

Determine in this tab what to invoice and the appearance of the invoice. There are different ways of prparing an invoice. Here is three methods.

New invoice – only text

Prepare the invoice text in Client & Project. The actual invoicing is later performed by the accounting department, who is using the text that is prepared and the instructions that have been given. Select New to create an invoice. You can create several invoices on one project.

Text

Create text in the Text tab.

Create text	Click Create Text if you want to use the project's WIP or to invoice from the cost estimate. Select first if the amounts shall be based on estimated values (and in that case select estimate) or onthe project's actual wip.
Itemiz. level	Select level of details for fees, purchases and other.
Subtotals	Select how you want the subtotals.

The suggestion can be changed. You can add own rows and subtotals and write a new text andamounts. Down right you can see a summary of the amounts and possible pre-invoices waiting for deduction.

Instructions	If the amounts are changed, it is very important to instruct the accounting department what shall be adjusted and what shall be left in WIP, etc. Use the field Instruction; it will not be shown on the invoice. The instructions are shown in the Analysis tab, under Invoiced, for each invoice.
Import text	If the invoice is similar to a previously created one, you can import text from old invoices and adjust the text to fit the actual one.
Invoice text ready	When the invoice is ready, tick the box Invoice text ready.
Invoicing fee	If invoicing fee is set, click the box if you want invoicing fee on this specific invoice.
Planned inv.date	Write a date.
Printout	When the invoice is saved you can print a test invoice. Select printout template.

New invoice – text and content

Prepare invoice text and content in Client & Project. The actual invoicing is later performed by the accounting department. Select New to create an invoice. You can create several invoices on one project.

Create text by following instructions in the chapter above ( 1. New invoice- only text).

Create content; please request a separate invoicing manual for instructions.

New invoice – collective invoice

Collective invoicing means invoicing several projects for a client on the same invoice. It is requested that:

The projects have the same client code

The projects have the same client number

Collective invoicing is allowed on the projects.

That the projects have the same invoicing currency at the time of printout.

Open one of the invoices and select Invoice Type Collective Invoice. Go to the tab Collective Invoice and fetch all the projects that shall be included, also the one you currently have open. In the Content tab you now see the WIP from all projects. Select what to invoice.

Invoice client

If the project has another rinvoicing address than the client, use a invoicing client on it. Fetch invoice client from the tab Parameters.

Notes

You can gather all notes about the project in this tab so that all colleagues can read it and also fill in their notes. A note is automatically marked with name and time.

If you want to write a note, click NEW to open a box, fill in heading and the note - you can also copy from a previous note, then Save.

Documents

Here you can make a connection to your ordinary file server. That means that you can quickly get access to documents that are connected to the project. The files are stored in one folder per project. Contact Kalin Setterberg for more information.

Project printouts

In this module you can print out different kinds of statistics about several projects at the same time. Select projects in the left part of the screen and the information you wish to include in the right part. The right part is similar to the printout tab in the separate projects.

Hits	If you want to check the number of projects found, click HITS
Print	Print selection
Save selection	You can save your selection
Master	If you use Master projects for grouping projects, you can select to sort by master here
Status	If you want to see projects with a certain status, select: Active Projects: Open for transactions Deactivated Projects: Temporarily closed for transactions. Deactivated projects can have WIP. Closed: Closed projects with no WIP.
Min WIP amount	You can select projects that have WIP exceeding a certain amount.
Marathon Time proj only	The list shows only projects that are available for time reporting in Marathon Time.
Sort	A menu to select sort order of the projects, e.g. project name, project manager or start date.

Reports

This is a module where you can print out and create reports. There are a few standard reports in the module but you can also create own reports. Please request separate manual fo creating reports.

Print out report

Select a report and click Printout. A selection window opens.

Make the selection on the left side. The selection possibilities may vary from onereport to another. The columns are already in the report template

Summation	Summations (subtotals) determine how the report shall be presented.
Sorting	Sort order for summation levels. ngsordning för respektive summeringsnivåer kan väljas. Click Reversed if you want the biggest amounts to be presented on top.
Print destination	The report can be printed to Pdf or Spreadsheet.
No sums	Printout without summarizations
Start	Start printout